How To Fix Nail Pops In Drywall

Steps Download Article

1

In the center of the nail pop, identify the tip of nail punch, and tap in with hammer.
ii

As y'all tap in the nail pop the sheet rock mud or old Spackle volition fall out and break off. If you lot discover a screw instead of a nail, simply tighten the spiral by turning clockwise with a Phillips screwdriver. And proceed with step 3.

Advertisement
3

Using "Dap Fast 'North Final Lightweight Spackling, and a small Spackle blade, spread a small amount over the hole.
iv

Let to set for about 10 minutes, (Adept time to prep other nail pops), and so lightly sand the nail popular with fine dust sandpaper (150 - 220).
five

Brush off excess sanded grit, primer and pigment with touch upwards pigment of the same color.

Advertisement

Add New Question

Question

How to get rid of black mold?

Read this: https://world wide web.wikihow.com/Kill-Black-Mold

Enquire a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Don't fail using primer before touch-upward paint. If you don't use primer on the patch it will "flash," or evidence through the pigment.
If your walls take a texture on them, you volition take to match information technology earlier painting. Some textures can be matched with some drywall mud or Spackle and a putty knife. Others accept to be sprayed on, and then if y'all accept i of those textures you buy a pocket-sized tin of texture at a home center or hardware store.
An selection after Footstep 2 is to use short drywall screws above and/or below the nails. This will ensure that the nails don't resurface. If you do this, be certain that the drywall screws dimple but don't pause the drywall paper surface.
There are other spackles too "Dap Fast 'North Final Lightweight Spackling", however this dries quick, and sands & paints easily. Can be picked upwards at Walmart, Home Depot, or whatever hardware shop.